If you have been reading about Pro-Gly-Pro and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2026-02-07. Where a claim depends on a specific study, the study is described rather than over-claimed.
Reversed-phase high-performance liquid chromatography is the standard technique for estimating peptide purity. The result is a peak-area percentage, which describes how much of the detected material elutes as the main peak in one run. Mass spectrometry confirms the molecular mass and can reveal truncated, adducted, or otherwise modified species. Amino acid analysis or tandem mass spectrometry can address sequence fidelity when identity is in doubt. None of these measurements, taken alone, establishes that a sample is fit for any specific purpose.
Lyophilized selank is normally supplied as a dry powder and is considered stable for extended periods when kept cold and dry. Moisture uptake is the main practical threat, because absorbed water promotes both hydrolysis and aggregation in the solid state. Vials are usually warmed to room temperature before opening so that condensation does not form on the powder. Supplier documentation commonly specifies -20 °C for routine storage, with -80 °C used for material intended to be archived for years.
The compound has a calculated molecular weight near 751.9 daltons and carries a net positive charge at physiological pH because of its arginine residue. It dissolves freely in water and in common aqueous buffers, and typically appears as a white or off-white lyophilized powder. The amide backbone makes the molecule susceptible to peptidases, which limits oral use and favors intranasal or parenteral routes. Nomenclature in the literature varies: the substance is also described by the sequence abbreviation TP-7 and by a Russian trade designation.
Regulatory status differs sharply by region. Selank holds a Russian marketing authorization, where it is supplied mainly as nasal drops, while authorities elsewhere have not approved it for medical use. Material sold internationally is therefore usually labeled as a research chemical rather than a medicine. Peer-reviewed publications come predominantly from Russian laboratories, and sample sizes are generally small. Whether the compound produces comparable effects under independent, well-controlled replication remains an open question that the broader literature has not settled.
| Property | Value | Notes |
|---|---|---|
| Typical purity specification | 95 percent or higher by RP-HPLC | Area percentage of the main peak |
| Identity confirmation | Electrospray ionization mass spectrometry | Observed mass compared with the theoretical value near 751.9 Da |
| Recommended dry storage | -20 °C, desiccated | -80 °C for multi-year archival material |
| Solution handling | Prepare fresh; avoid long storage | Sterile filtration reduces microbial load |
| Common synonyms | TKPRPGP; TP-7 | Sequence code and laboratory designation used interchangeably |
Selank is not a naturally occurring peptide and has no known endogenous counterpart in human physiology. Russian-language sources frequently call it TP-7, while English-language sources use the name Selank almost exclusively. Database indexing is uneven, partly because early reports appeared in regional journals that are not widely cataloged. Some summaries describe the material as a tuftsin analog and others as a synthetic heptapeptide; the labels overlap rather than conflict. Citing the primary sequence resolves ambiguity more reliably than the research or trade name alone.
Selank is a synthetic heptapeptide with the sequence Thr-Lys-Pro-Arg-Pro-Gly-Pro, written TKPRPGP in one-letter notation. Its structure consists of the immunomodulatory tetrapeptide tuftsin, Thr-Lys-Pro-Arg, extended at the carboxyl terminus by a Pro-Gly-Pro segment. The molecular formula is commonly given as C33H57N11O9, corresponding to a monoisotopic mass near 751.4 Da and an average molecular mass near 751.9 Da. All seven residues are proteinogenic amino acids, and the molecule carries no modified side chains or non-natural linkages.
Naming for this compound is not fully standardised in English sources. The spelling Selanc appears in some transliterations, and catalogue entries may instead list the peptide sequence itself as the identifier. Reference material sometimes groups it with other short synthetic peptides studied for behavioural effects, which can create confusion when citations are compared. Distinguishing the exact sequence from related tuftsin analogues is therefore a practical first step when reviewing any dataset or specification sheet.
Selank is a synthetic heptapeptide with the sequence Thr-Lys-Pro-Arg-Pro-Gly-Pro, frequently abbreviated as TKPRPGP. It was designed as a structural analogue of tuftsin, a naturally occurring tetrapeptide released by enzymatic cleavage of the immunoglobulin heavy chain. The two additional proline residues at the C-terminal end extend the parent chain and change how the molecule behaves in solution. The free peptide has a calculated molecular mass of approximately 751.9 g/mol and is generally supplied as a lyophilised white to off-white powder.
Solubility behavior is a practical concern for handling. Selank dissolves readily in water and in common aqueous buffers, which simplifies preparation of working solutions. The choice of solvent, ionic strength, and pH can influence aggregation over time, particularly at higher concentrations. Aqueous solutions are typically sterile-filtered before use. Because stability depends on several variables, storage and handling notes should be treated as general guidance rather than fixed rules, and specific values are best confirmed against a certificate of analysis for each batch.
Characterization of Selank in a laboratory setting relies on standard peptide methods. Reverse-phase high-performance liquid chromatography separates the target from related impurities and provides a purity figure, commonly reported as 95 percent or higher. Mass spectrometry, typically electrospray ionization or matrix-assisted laser desorption, confirms the molecular mass and helps detect truncation or modification. Amino acid analysis can verify composition when a sequence-level check is needed. These techniques together establish identity and purity for a given lot.
Lyophilized Selank, the dry powder form, is generally stored frozen at minus 20 degrees Celsius or colder for long-term keeping. The solid is hygroscopic and should stay sealed, dry, and protected from light. Once dissolved, the peptide is less stable and is usually held refrigerated at 2 to 8 degrees Celsius for short periods. Repeated freezing and thawing is avoided because it can promote aggregation and loss of activity. Buffers and pH choice also affect how long a solution remains usable.
Identity and purity are usually assessed by reversed-phase high-performance liquid chromatography, with mass spectrometry used to confirm molecular mass and sequence information. Amino acid analysis and peptide mapping may supplement these methods. Certified reference standards are scarce, and many commercial lots are sold as research chemicals without a pharmacopoeial monograph. Regulatory treatment differs by country: Selank is a registered prescription medicine in Russia, while in the European Union and the United States it is not an approved drug and may fall under research-chemical or unapproved-product frameworks.
Selank is a hydrophilic peptide and dissolves readily in water and in aqueous buffers. The lyophilised powder is typically a white to off-white solid. Because short peptides are prone to hydrolysis and oxidation, handling benefits from limiting exposure to heat, moisture and strong light. Working solutions are commonly prepared in sterile water or saline, and repeated freeze-thaw cycles are avoided to reduce aggregation and loss of activity. These practices reflect general laboratory convention rather than published stability specifications.
Dry powder is normally held at -20 degrees Celsius or lower, in a sealed container with desiccant and protection from light. Reconstituted solutions are usually kept at 2 to 8 degrees Celsius for short periods and frozen for longer ones. Proline residues at several positions are generally associated with some resistance to peptidase attack, but chemical stability still declines at neutral to alkaline pH and at elevated temperature. Exact shelf-life figures are product-specific and are not standardised across suppliers.
=== Electronation and de-electronation === The electrochemist John Bockris proposed the words electronation and de-electronation to describe reduction and oxidation processes, respectively, when they occur at electrodes. These words are analogous to protonation and deprotonation. IUPAC has recognized the terms electronation and de-electronation.
In chemistry, dimerization is the process of joining two identical or similar molecular entities by bonds. The resulting bonds can be either strong or weak. Many symmetrical chemical species are described as dimers, even when the monomer is unknown or highly unstable. The term homodimer is used when the two subunits are identical (e.g. A–A) and heterodimer when they are not (e.g. A–B). The reverse of dimerization is often called dissociation. When two oppositely-charged ions associate into dimers, they are referred to as Bjerrum pairs, after Danish chemist Niels Bjerrum.
It is used to join DNA pieces containing genes, regulatory sequences, or mutations; the technique enables creation of specific and long DNA constructs. It can also introduce deletions, insertions or point mutations into a DNA sequence. PAN-AC: uses isothermal conditions for amplification, and may be used in living cells. PAN-PCR: A computational method for designing bacterium typing assays based on whole genome sequence data. Quantitative PCR (qPCR): used to measure the quantity of a target sequence (commonly in real-time). It quantitatively measures starting amounts of DNA, cDNA, or RNA. Quantitative PCR is commonly used to determine whether a DNA sequence is present in a sample and the number of its copies in the sample. Quantitative PCR has a very high degree of precision. Quantitative PCR methods use fluorescent dyes, such as Sybr Green, EvaGreen or fluorophore-containing DNA probes, such as TaqMan, to measure the amount of amplified product in real time. It is also sometimes abbreviated to RT-PCR (real-time PCR) but this abbreviation should be used only for reverse transcription PCR. qPCR is the appropriate contractions for quantitative PCR (real-time PCR). Reverse complement PCR (RC-PCR): Allows the addition of functional domains or sequences of choice to be appended independently to either end of the generated amplicon in a single closed tube reaction. This method generates target specific primers within the reaction by the interaction of universal primers (which contain the desired sequences or domains to be appended) and RC probes.
During the 1990s, people in the West were also interested in the radioactive hazards of nuclear facilities, decommissioned nuclear submarines, and the processing of nuclear waste or spent nuclear fuel. It was also known in the early 1990s that the USSR had transported radioactive material to the Barents Sea and Kara Sea, which was later confirmed by the Russian parliament. The crash of the K-141 Kursk submarine in 2000 in the west further raised concerns. In the past, there were accidents involving submarines K-19, K-8, a K-129, K-27, K-219 and K-278 Komsomolets.
Sources: en.wikipedia.org
== DNA-encoded chemical libraries and display technologies == Until recently, the application of molecular evolution in the laboratory had been limited to display technologies involving biological molecules, where small molecules lead discovery was considered beyond this biological approach. DELs have opened the field of display technology to include non-natural compounds such as small molecules, extending the application of molecular evolution and natural selection to the identification of small molecule compounds of desired activity and function. DNA encoded chemical libraries bear resemblance to biological display technologies such as antibody phage display technology, yeast display, mRNA display and aptamer SELEX. In antibody phage display, antibodies are physically linked to phage particles that bear the gene coding for the attached antibody, which is equivalent to a physical linkage of a “phenotype” (the protein) and a “genotype” (the gene encoding for the protein ). Phage-displayed antibodies can be isolated from large antibody libraries by mimicking molecular evolution: through rounds of selection (on an immobilized protein target), amplification and translation. In DELs the linkage of a small molecule to an identifier DNA code allows the facile identification of binding molecules.
== Bibliography == Lytle, Charles F.; Meyer, John R. (May 21, 2004). General Zoology Laboratory Guide (Fourteenth ed.). New York: McGraw-Hill. ISBN 978-0-07-234900-9. Müller, Werner E.G. (February 2003). "The Origin of Metazoan Complexity: Porifera as Integrated Animals". Integrative and Comparative Biology. 43 (1): 3–10. CiteSeerX 10.1.1.333.3174. doi:10.1093/icb/43.1.3. JSTOR 3884834. PMID 21680404. {{cite journal}}: Cite uses deprecated parameter |citeseerx= (help)
Vaginal discharge may indicate a vaginal infection by color and odor, or the resulting symptoms of discharge, such as irritation or burning. Abnormal vaginal discharge may be caused by STIs, diabetes, douches, fragranced soaps, bubble baths, birth control pills, yeast infection (commonly as a result of antibiotic use) or another form of vaginitis. While vaginitis is an inflammation of the vagina, and is attributed to infection, hormonal issues, or irritants, vaginismus is an involuntary tightening of the vagina muscles during vaginal penetration that is caused by a conditioned reflex or disease. Vaginal discharge due to yeast infection is usually thick, creamy in color and odorless, while discharge due to bacterial vaginosis is gray-white in color, and discharge due to trichomoniasis is usually a gray color, thin in consistency, and has a fishy odor. Discharge in 25% of the trichomoniasis cases is yellow-green. HIV/AIDS, human papillomavirus (HPV), genital herpes and trichomoniasis are some STIs that may affect the vagina, and health sources recommend safe sex (or barrier method) practices to prevent the transmission of these and other STIs. Safe sex commonly involves the use of condoms, and sometimes female condoms (which give women more control). Both types can help avert pregnancy by preventing semen from coming in contact with the vagina.
To better understand the challenges for building full-thickness engineered oral mucosa it is important to first understand the structure of normal oral mucosa. Normal oral mucosa consists of two layers, the top stratified squamous epithelial layer and the bottom lamina propria. The epithelial layer consists of four layers:
In the extracellular space in tissues, type III collagen monomers assemble into macromolecular fibrils, which aggregate into fibers, providing a strong support structure for tissues requiring tensile strength. The triple-helical conformation, which is a characteristic feature of all fibrillar collagens, is possible because of the presence of glycine as every third amino acid in the sequence of about 1000 amino acids. When the right-handed super-helix is formed, the glycine residues of each of the monomers are positioned at the center of the super-helix (where the three monomers "touch"). Each left-handed helix is characterized by a complete turn in about 3.3 amino acids. The periodicity induced by the glycines at non-integer spacing results in a super-helix that completes one turn in about 20 amino acids. This (Gly-X-Y)n sequence is repeated 343 times in the type III collagen molecule. Proline or hydroxyproline is often found in the X- and Y-position giving the triple helix stability. Several fragments of human type III collagen have been solved by X-ray crystallography, including the C-terminal propeptide trimer that governs chain selection during procollagen assembly and a cystine-knot-containing triple-helical peptide near the C-terminus, which was found to adopt both 7/2 and 10/3 triple-helical symmetries. Full-length fibrillar collagen has not been crystallized because of its length and flexibility.
Sources: en.wikipedia.org
Plastic casings are not eaten. They also can be flat or shirred. Generally, smoke and water cannot pass through the casing, so plastic is used for non-smoked products where high yields are expected. The inner surface can be laminated or co-extruded with a polymer with an affinity for meat protein causing the meat to stick to the film, resulting in some loss when the casing is peeled, but higher overall yield due to better moisture control. Plastic casings are generally made from polymers such as polyamide, polypropylene, or polyethylene. Polyamide (Nylon) plastic casings are the most commonly used in production of cooked sausages and hams such as luncheon meat and bologna. Polyamide casings come in two main varieties: Oriented and non-oriented. The oriented polyamide are shrinkable casings and will shrink during the cooking process thereby reducing the water loss. Non-oriented polyamide casings remain the same diameter during the cooking process and thereby allow for expansion of the meat during cooking. The use of polyamide casings has expanded recently with the advent of various varieties and structures of casings such as multilayer casings.
=== Alport syndrome === Mutations to the genes COL4A3, COL4A4 and/or COL4A5 coding for collagen IV lead to Alport syndrome. This will cause thinning and splitting of the glomerular basement membrane. It may present as isolated hematuria, sensorineural hearing loss, and ocular disturbances and is passed on genetically in an autosomal dominant, autosomal recessive, or X-linked manner.
Experimental measurements of its density give values between 11.5 and 11.66 g/cm3: these are slightly lower than the theoretically expected value of 11.7 g/cm3 calculated from thorium's lattice parameters, perhaps due to microscopic voids forming in the metal when it is cast. These values lie between those of its neighbours actinium (10.1 g/cm3) and protactinium (15.4 g/cm3), part of a trend across the early actinides. Thorium can form alloys with many other metals. Addition of small proportions of thorium improves the mechanical strength of magnesium, and thorium–aluminium alloys have been considered as a way to store thorium in proposed future thorium nuclear reactors. Thorium forms eutectic mixtures with chromium and uranium, and it is completely miscible in both solid and liquid states with its lighter congener cerium.
A 2015 study concluded that minorities have been disproportionately arrested for drug offenses and the difference could not "be explained by differences in drug offending, non-drug offending, or residing in the kinds of neighborhoods likely to have heavy police emphasis on drug offending." The nature of the U.S.-sponsored war on drugs creates two dangerous consequences that often go largely unnoticed: racial profiling and irreversible harm done through legislation, both at the international and domestic spheres. With the introduction of the USA Patriot Act in October 2001 the United States appears to employ a surveillance strategy that ultimately weakens the civil rights of those affected, often through unbalanced criminal proceedings. These policies fail to acknowledge South American women's realities, which are intersectionality observed through socioeconomic positions, cultural and gender expectations, and unfamiliarity with the English language in criminal procedures Studies have shown the increase of racial profiling in Latino women as a method to deter the war on drugs, creating power imbalances as U.S. policies are pushed to national South American governments. The war on drugs has caused irreversible consequences to Latino women that should shape future understanding of the harms of racial profiling and not addressing the deeper issues of individual realities in the conflict.
== Related products == Waferboard belongs to the subset of reconstituted wood panel products called flakeboards. It is a structural material made from rectangular wood flakes of controlled length and thickness bonded together with waterproof phenolic resin under extreme heat and pressure. The layers of flakes are not oriented, which makes it easier to manufacture. Waferboard is used as a material to build cheap furniture. This type of furniture is usually laminated. Materials other than wood have been used to produce products similar to OSB. Oriented structural straw board is an engineered board made by splitting straw and formed by adding P-MDI adhesives and then hot compressing layers of straw in specific orientations. Strand board can also be made from bagasse.
Sources: en.wikipedia.org
Sealed, desiccated storage at -20 °C or colder is the standard recommendation for research-grade material. Vials should reach room temperature before they are opened, which limits condensation. Repeated temperature cycling is discouraged.
A reported purity value reflects the share of the main peak in one chromatographic run and says nothing about identity. Confirming that the expected sequence is present requires a separate measurement such as mass spectrometry. Purity and identity are distinct questions.
A mass spectrum reports the molecular masses present in a sample and shows whether they match the value expected for selank, near 751.9 Da. It also flags common artifacts such as truncation or adduct formation. It does not establish correct stereochemistry or complete sequence order on its own.
Selank is a synthetic seven-amino-acid peptide modeled on tuftsin, a fragment of the immunoglobulin G heavy chain. It was designed in Russia to combine anxiolytic and immunomodulatory properties in one molecule.